Jump to: navigation, search

Difference between revisions of "Obtain Original Game Files"

m (This is why you should preview your edits.)
m (From Wii Disc)
 
(3 intermediate revisions by 2 users not shown)
Line 1: Line 1:
In order to be able to use the level editor, you will need a copy of the game's '''[[Stage Folder]]''', which contains all the original levels and tilesets which the editor will use. There are several ways to obtain the game's files, which are listed below.
+
In order to be able to use the level editor, you will need a copy of the game's '''[[Stage Folder]]''', which contains all the original levels and tilesets which the editor will use. There are several ways to obtain the game's files, which are listed below. It is recommended to dump all the files in the disc, because you might need them in the future.
 
 
__TOC__
 
 
 
 
=From Wii Disc=
 
=From Wii Disc=
 
These methods are '''fully legal''', because they require you to own the game disc. You will also need an '''homebrew-enabled Wii'''. You can find an excellent guide for enabling homebrew '''[https://sites.google.com/site/completesg/ at this link]'''.
 
These methods are '''fully legal''', because they require you to own the game disc. You will also need an '''homebrew-enabled Wii'''. You can find an excellent guide for enabling homebrew '''[https://sites.google.com/site/completesg/ at this link]'''.
Line 18: Line 15:
 
Download '''ReggieDumper''' and extract the archive on the '''root''' of the SD Card/USB Drive. Overwrite if necessary. The "'''apps'''" folder should look like this :
 
Download '''ReggieDumper''' and extract the archive on the '''root''' of the SD Card/USB Drive. Overwrite if necessary. The "'''apps'''" folder should look like this :
  
[[File:ReggieDumper1.png]]
+
[[File:ReggieDumper1.png||link=]]
  
 
Turn the Wii on and insert '''New Super Mario Bros. Wii''''s disc. After that, open the '''Homebrew Channel''' and start '''ReggieDumper'''. You will be welcomed by this screen :
 
Turn the Wii on and insert '''New Super Mario Bros. Wii''''s disc. After that, open the '''Homebrew Channel''' and start '''ReggieDumper'''. You will be welcomed by this screen :
  
[[File:ReggieDumper2.png]]
+
[[File:ReggieDumper2.png||link=]]
  
 
If you only want to get the files needed for Reggie, press '''A'''. To get the entire content of the disc, press '''B'''. Let the app do its job, and when it finishes press '''Home''' to go back to the '''Homebrew Channel'''.
 
If you only want to get the files needed for Reggie, press '''A'''. To get the entire content of the disc, press '''B'''. Let the app do its job, and when it finishes press '''Home''' to go back to the '''Homebrew Channel'''.
  
[[File:ReggieDumper3.png]]
+
[[File:ReggieDumper3.png||link=]]
  
 
Now, put the '''SD Card/USB Drive''' back into your computer. You will find a folder named '''reggie''', with the dumped files inside.
 
Now, put the '''SD Card/USB Drive''' back into your computer. You will find a folder named '''reggie''', with the dumped files inside.
  
[[File:ReggieDumper4.png]]
+
[[File:ReggieDumper4.png||link=]]
  
 
Proceed to the [[Running Reggie Level Editor|next tutorial]] to continue preparing your setup.
 
Proceed to the [[Running Reggie Level Editor|next tutorial]] to continue preparing your setup.
Line 45: Line 42:
 
Download '''ReggieDumper''' and extract the archive on the '''root''' of the SD Card/USB Drive. Overwrite if necessary. The "'''apps'''" folder should look like this :
 
Download '''ReggieDumper''' and extract the archive on the '''root''' of the SD Card/USB Drive. Overwrite if necessary. The "'''apps'''" folder should look like this :
  
[[File:WiiXplorer1.png]]
+
[[File:WiiXplorer1.png||link=]]
  
 
Turn the Wii on and insert '''New Super Mario Bros. Wii''''s disc. After that, open the '''Homebrew Channel''' and start '''WiiXplorer'''. You will be welcomed by this screen :
 
Turn the Wii on and insert '''New Super Mario Bros. Wii''''s disc. After that, open the '''Homebrew Channel''' and start '''WiiXplorer'''. You will be welcomed by this screen :
  
[[File:WiiXplorer2.png]]
+
[[File:WiiXplorer2.png||link=]]
  
 
Now click on the '''SD Card''' symbol on the top left corner, then choose '''DVD'''. Pay attention not to switch back and forth between these two too quickly, or the app will '''crash'''.
 
Now click on the '''SD Card''' symbol on the top left corner, then choose '''DVD'''. Pay attention not to switch back and forth between these two too quickly, or the app will '''crash'''.
  
[[File:WiiXplorer3.png]]
+
[[File:WiiXplorer3.png||link=]]
  
 
After the disc is loaded, click on any folder to make the disc's directories appear. You will see two folders, named respectively "'''0 Update'''" and "'''1 Data'''". The first contains updates for the '''System Menu''', while the second contains the actual '''game files'''.
 
After the disc is loaded, click on any folder to make the disc's directories appear. You will see two folders, named respectively "'''0 Update'''" and "'''1 Data'''". The first contains updates for the '''System Menu''', while the second contains the actual '''game files'''.
  
[[File:WiiXplorer4.png]]
+
[[File:WiiXplorer4.png||link=]]
  
 
You now have two options :
 
You now have two options :
Line 63: Line 60:
 
* If you want to get the entire disc, do the same as above, but copy the entire '''1 Data''' folder instead.
 
* If you want to get the entire disc, do the same as above, but copy the entire '''1 Data''' folder instead.
  
[[File:WiiXplorer5.png]]
+
[[File:WiiXplorer5.png||link=]]
  
 
After the operation is complete, press '''Home''' to exit the app/turn off the Wii. Insert the '''SD Card/USB Drive''' back into your computer to access the dumped files. You can then proceed to the [[Running Reggie Level Editor|next tutorial]] to continue preparing your setup.
 
After the operation is complete, press '''Home''' to exit the app/turn off the Wii. Insert the '''SD Card/USB Drive''' back into your computer to access the dumped files. You can then proceed to the [[Running Reggie Level Editor|next tutorial]] to continue preparing your setup.
Line 81: Line 78:
 
Install '''Dolphin''' and open it. Once in, add the folder your ISO/WBFS file is in. '''Right-click''' on the game and press '''Properties'''.
 
Install '''Dolphin''' and open it. Once in, add the folder your ISO/WBFS file is in. '''Right-click''' on the game and press '''Properties'''.
  
[[File:DolphinExtract1.png]]
+
[[File:DolphinExtract1.png||link=]]
  
 
In the window that opens, move to the '''Filesystem''' tab.
 
In the window that opens, move to the '''Filesystem''' tab.
  
[[File:DolphinExtract2.png]]
+
[[File:DolphinExtract2.png||link=]]
  
 
Once there, you can extract the whole disc by right-clicking on '''Disc''' and choosing '''Extract All Files''', or you can manually find the Stage folder by looking in the directories and extract it individually.
 
Once there, you can extract the whole disc by right-clicking on '''Disc''' and choosing '''Extract All Files''', or you can manually find the Stage folder by looking in the directories and extract it individually.
  
[[File:DolphinExtract3.png]]
+
[[File:DolphinExtract3.png||link=]]
  
 
Now choose a folder where to extract the disc, and let the extraction complete. You can then proceed to the [[Running Reggie Level Editor|next tutorial]] to continue preparing your setup.
 
Now choose a folder where to extract the disc, and let the extraction complete. You can then proceed to the [[Running Reggie Level Editor|next tutorial]] to continue preparing your setup.
Line 105: Line 102:
 
Download the program from the given link, extract the archive wherever you want and start the program. After that, click the '''Load''' button on the bottom-left corner of the window.
 
Download the program from the given link, extract the archive wherever you want and start the program. After that, click the '''Load''' button on the bottom-left corner of the window.
  
[[File:WiiBaFu1.png]]
+
[[File:WiiBaFu1.png||link=]]
  
 
Now browse to the '''folder''' where the ISO file is. Once the program finishes scanning it, select '''New Super Mario Bros. Wii''' and then click on '''Extract Image'''.
 
Now browse to the '''folder''' where the ISO file is. Once the program finishes scanning it, select '''New Super Mario Bros. Wii''' and then click on '''Extract Image'''.
  
[[File:WiiBaFu2.png]]
+
[[File:WiiBaFu2.png||link=]]
  
 
In the window that appears, click on '''Open''' and choose a '''folder''' for the files to be extracted in. Once you are ready, press '''OK''' to start the extraction.
 
In the window that appears, click on '''Open''' and choose a '''folder''' for the files to be extracted in. Once you are ready, press '''OK''' to start the extraction.
  
[[File:WiiBaFu3.png]]
+
[[File:WiiBaFu3.png||link=]]
  
 
Once the extraction is done, proceed to the [[Running Reggie Level Editor|next tutorial]] to continue preparing your setup.
 
Once the extraction is done, proceed to the [[Running Reggie Level Editor|next tutorial]] to continue preparing your setup.
Line 129: Line 126:
 
Download '''WiiScrubber''' from the link above and run it. Once you're in, click on '''Load''' and choose the ISO file.
 
Download '''WiiScrubber''' from the link above and run it. Once you're in, click on '''Load''' and choose the ISO file.
  
[[File:WiiScrubber1.png]]
+
[[File:WiiScrubber1.png||link=]]
  
 
After it loads, '''right-click''' on the partition named '''DATA''' (which is usually Partition 1), then choose '''Unencrypted Partition''' > '''Extract'''.
 
After it loads, '''right-click''' on the partition named '''DATA''' (which is usually Partition 1), then choose '''Unencrypted Partition''' > '''Extract'''.
  
[[File:WiiScrubber2.png]]
+
[[File:WiiScrubber2.png||link=]]
  
 
Choose the '''destination folder''' and wait for the extraction to finish (it may take some time). When it ends, you can close '''WiiScrubber''' (if a message appears, ignore it and click on '''Yes'''). Proceed to the [[Running Reggie Level Editor|next tutorial]] to continue preparing your setup.
 
Choose the '''destination folder''' and wait for the extraction to finish (it may take some time). When it ends, you can close '''WiiScrubber''' (if a message appears, ignore it and click on '''Yes'''). Proceed to the [[Running Reggie Level Editor|next tutorial]] to continue preparing your setup.
  
 
[[Category:Tutorials]]
 
[[Category:Tutorials]]

Latest revision as of 18:37, 18 September 2018

In order to be able to use the level editor, you will need a copy of the game's Stage Folder, which contains all the original levels and tilesets which the editor will use. There are several ways to obtain the game's files, which are listed below. It is recommended to dump all the files in the disc, because you might need them in the future.

From Wii Disc[edit | edit source]

These methods are fully legal, because they require you to own the game disc. You will also need an homebrew-enabled Wii. You can find an excellent guide for enabling homebrew at this link.


Method 1 : ReggieDumper[edit | edit source]

ReggieDumper is a small homebrew app which allows you to dump New Super Mario Bros. Wii's files.

Requirements[edit | edit source]

  • SD Card (possibly not SDHC) or USB drive with at least 15 MB of free space (for the "Stage" folder only) or 400 MB (to dump the whole disc)
  • ReggieDumper

Steps[edit | edit source]

Download ReggieDumper and extract the archive on the root of the SD Card/USB Drive. Overwrite if necessary. The "apps" folder should look like this :

ReggieDumper1.png

Turn the Wii on and insert New Super Mario Bros. Wii's disc. After that, open the Homebrew Channel and start ReggieDumper. You will be welcomed by this screen :

ReggieDumper2.png

If you only want to get the files needed for Reggie, press A. To get the entire content of the disc, press B. Let the app do its job, and when it finishes press Home to go back to the Homebrew Channel.

ReggieDumper3.png

Now, put the SD Card/USB Drive back into your computer. You will find a folder named reggie, with the dumped files inside.

ReggieDumper4.png

Proceed to the next tutorial to continue preparing your setup.

Method 2 : WiiXplorer[edit | edit source]

WiiXplorer is a file explorer application for the Wii. Along its countless features, it allows copying files from Wii Discs, which is the scope of this guide.

Requirements[edit | edit source]

  • SD Card (possibly not SDHC) or USB drive with at least 15 MB of free space (for the "Stage" folder only) or 400 MB (to dump the whole disc)
  • WiiXplorer

Steps[edit | edit source]

Download ReggieDumper and extract the archive on the root of the SD Card/USB Drive. Overwrite if necessary. The "apps" folder should look like this :

WiiXplorer1.png

Turn the Wii on and insert New Super Mario Bros. Wii's disc. After that, open the Homebrew Channel and start WiiXplorer. You will be welcomed by this screen :

WiiXplorer2.png

Now click on the SD Card symbol on the top left corner, then choose DVD. Pay attention not to switch back and forth between these two too quickly, or the app will crash.

WiiXplorer3.png

After the disc is loaded, click on any folder to make the disc's directories appear. You will see two folders, named respectively "0 Update" and "1 Data". The first contains updates for the System Menu, while the second contains the actual game files.

WiiXplorer4.png

You now have two options :

  • If you want to get the Stage folder only, go to 1 Data > files. Once you find the Stage folder, hover the pointer over it, press + and choose Copy. Then switch back to the SD Card/USB Drive, press + anywhere and choose Paste.
  • If you want to get the entire disc, do the same as above, but copy the entire 1 Data folder instead.

File:WiiXplorer5.png

After the operation is complete, press Home to exit the app/turn off the Wii. Insert the SD Card/USB Drive back into your computer to access the dumped files. You can then proceed to the next tutorial to continue preparing your setup.

From ISO/WBFS[edit | edit source]

For those who have decided to sail the high seas, there are three other methods which can be used to extract the game's files. You will not find any download link for the game on this site, so search for one yourself.

Method 1 : Dolphin Emulator[edit | edit source]

An easy (and usually unnoticed) way to extract any Wii game disc is to use Dolphin's filesystem feature.

Requirements[edit | edit source]

  • New Super Mario Bros. Wii ISO or WBFS file
  • Dolphin Emulator (latest stable build is recommended)

Steps[edit | edit source]

Install Dolphin and open it. Once in, add the folder your ISO/WBFS file is in. Right-click on the game and press Properties.

DolphinExtract1.png

In the window that opens, move to the Filesystem tab.

DolphinExtract2.png

Once there, you can extract the whole disc by right-clicking on Disc and choosing Extract All Files, or you can manually find the Stage folder by looking in the directories and extract it individually.

DolphinExtract3.png

Now choose a folder where to extract the disc, and let the extraction complete. You can then proceed to the next tutorial to continue preparing your setup.

Method 2 : Wii Backup Fusion[edit | edit source]

Wii Backup Fusion is a user-friendly version of Wiimm's ISO Tools, a fully-fledged ISO/WBFS manager. It's also the fastest tool in terms of extraction time, so it's really recommended to use it.

Requirements[edit | edit source]

Steps[edit | edit source]

Download the program from the given link, extract the archive wherever you want and start the program. After that, click the Load button on the bottom-left corner of the window.

WiiBaFu1.png

Now browse to the folder where the ISO file is. Once the program finishes scanning it, select New Super Mario Bros. Wii and then click on Extract Image.

WiiBaFu2.png

In the window that appears, click on Open and choose a folder for the files to be extracted in. Once you are ready, press OK to start the extraction.

WiiBaFu3.png

Once the extraction is done, proceed to the next tutorial to continue preparing your setup.

Method 3 : WiiScrubber (OUTDATED)[edit | edit source]

WiiScrubber is an old ISO manager tool, exclusively for Windows platforms. It is recommended to use the other methods for extracting the game's files.

Requirements[edit | edit source]

  • New Super Mario Bros. Wii raw ISO file (it's around 4,3GB in size)
  • WiiScrubber

Steps[edit | edit source]

Download WiiScrubber from the link above and run it. Once you're in, click on Load and choose the ISO file.

WiiScrubber1.png

After it loads, right-click on the partition named DATA (which is usually Partition 1), then choose Unencrypted Partition > Extract.

WiiScrubber2.png

Choose the destination folder and wait for the extraction to finish (it may take some time). When it ends, you can close WiiScrubber (if a message appears, ignore it and click on Yes). Proceed to the next tutorial to continue preparing your setup.